Pavel

BTW use 32bit rrdtool in case you have already some old data created by iolder versionPERL: /opt/freeware/bin/perl_32RRDTOOL=/opt/freeware/bin/rrdtool_32 Malloc error above is typical for situation when you have 32bit database filess accessed by 64 bit rrdtool.

Hi, ok, seen that many times, it is about order in PERL5LIB, try this, I am not sure if these 5.30.3-2 directory exist exactly, adjust them if necessary…

Hi, send us logs Note a short problem description in the text field of the upload form. cd /home/stor2rrd/stor2rrd # or where is your STOR2RRD working dir tar cvhf logs.tar logs tmp/*txt gzip -9 logs.tar Send us logs.tar.gz via https://upload.stor2rrd.com

Hi, do you see data in graphs properly?

do you get any error? 32 vr 64 bit problems we already seen many times, got solutions ...

Hi, thanks for such info, do you know which firmware will contain that fix?Can you find it out? Thanks!

Hi Keith, we have tested max Perl 5.28-1 on our AIXes in labs. It works with rrdtool 1.7.x.I try to upgrade it on the latest levels and will let you know later on this week.

Have you upgraded even the xormon to the latest version?

Hi, "report based on filesystem" What that means, do you need to save data anywhere? use Reporter feature ...

Hi, we support already some Inspur devices like AS 5500/5300/2600/2200 and might be even others.I believe that most of Inspur storage devices are re-brands. Therefore is quite likely that we already support originals. What storage device support exactly are you looking for?

yes, either deploy 2 instances or cluster it via the OS level cluster

Hi, there no such docu, however it is quite simple 1. install the tool somewhere as per instructions2. enable necessary network access to the storage as per table on the bottom of https://stor2rrd.com/install.php#storages3. add storage devices as per install manual.

Hi, what storage exactly do you want to add?Anyting on our voting list? https://stor2rrd.com/voting.php New devices must be added by us, there is no any generic API We add new device when there is general user demand for it or if the vendor or whoever else pays for its implementation.

Hi Chris, it is ok, there is not impelented historical reporting for OpenShift yet.

send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

Hi, 1. can you log on to the HMC UI with lpar2rrd user credentials? 2. as per docu: https://lpar2rrd.com/IBM-Power-Systems-performance-monitoring-installation.php?5.0#HMCRESTAPI Allow remote access via the web: HMC ➡ Manage User Profiles and Access ➡ select lpar2rrd ➡ modify ➡ user properties ➡ Allow remote access via the…

send us logs Note a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

I mean monitor it via lpar2rrd

Do you monitor that VM via virtualisation management station (like VMware, Hyper-V, RHV ...)

is hostanme stnsvpeadb201 same as the VM name?

Hi, is stnsvpeadb201 a VM runing on VMware or any other virtualisation platform?Do you monitoring that virtualisation platform via lpar2rrd? You should see that data under that platform in the lpar2rd menu, pls check ls -l /home/lpar2rrd/lpar2rrd/tmp/menu*grep stnsvpeadb201 /home/lpar2rrd/lpar2rrd/tmp/menu*grep…

Hi, date ls -ltr /var/tmp/lpar*tail /var/tmp/lpar*err

Hi, do you see similar error in logs? grep <your vios lpar name> logs/*rest* 500:Unknown internal error.:Error occurred while querying for VirtualMediaRepository from VIOS

Hi, it is something we aready seen, pls report it to AIX support, we just present what we get from fcstat. BTW there is some apar, I am not sure if it is related or nothttps://www.ibm.com/support/pages/apar/IJ32635

Hi, provide us: 1.date fcstat <fcsX adapter> | grep Bytessleep 300fcstat <fcsX adapter> | grep Bytes 2. screenshot ofthe SAN graph from that time period, zoom it on that time

hi, it works automatically, perahps you should have waited a bit

screenshot of one VM, CPU daily graph

Hi, 1. send us screenshot(s) to document the issue 2. logsNote a short problem description in the text field of the upload form. cd /home/lpar2rrd/lpar2rrd # or where is your LPAR2RRD working dir tar cvhf logs.tar logs tmp/*txt tmp/*json gzip -9 logs.tar Send us logs.tar.gz via https://upload.lpar2rrd.com

Hi, can you see actual data in graphs?

Have you just build the container? Is it less than 1 hour ago? You should see the UI already, try it.