Comments
-
sorry I haven't gotten back sooner however we went through a reorg here and I have been on other things. so the only thing I see new is the trunks in cisco switches still no switch to storage for cisco.
-
Hello I am having the same issue with a NetApp fas9000 any idea what the solution is?
-
Done!
-
will do
-
Sorry 2.71 supported. Latest and greatest!
-
Thanks for the answer!
-
Both of those graphs are empty. So what is the I/o screen showing just housekeeping I/O???
-
Files submitted we now see other pools with the same issue.
-
he recreated his dashboards and an hour later when he went back in they were gone again. I have uploaded logs as requested.
-
we can recreate the dashboards but should be noted that they would go away.
-
so the log entry causing the issue rolled off after 14 days and data collection has resumed
-
btw the sas cable is find we had a bad connection that has since been fixed a week ago.
-
Worked like a champ Thanks for the help!
-
ok so it works partially. if I do a config_check.sh VNX_NAME it comes back with 8-10 blank lines. Also in collection log I get errors like this: Use of uninitialized value $day in concatenation (.) or string at /home/stor2rrd/stor2rrd/bin/vnxperf.pl line 2501. Use of uninitialized value $min in concatenation (.) or string…
-
ok thank you for the response.
-
fixed that yesterday still issue as above!
-
only error in error.log is volumes stats: /home/stor2rrd/stor2rrd/data/lit-3parsm1-p0471/VVOL/281.rrd does not exist, continuing /home/stor2rrd/stor2rrd/bin/storage.pl:10646
-
have done all request still have no data in heatmap, Volume,vvol,Port, or host. Whats next?
-
yes there is no data for the array although some of it is populated on the stor2rrd server. Graphs are empty
-
found it fixed it
-
it looks to be working but arrays are getting this msg now: SSH client (SSH-2.0-OpenSSH_7.4) from 10.9.18.115 sent unsupported channel request (10, env). any ideas?
-
it was in the root list needs to be in rw also
-
here is what I see in the root list mine is the first Ip. /vol/vol0 -sec=sys,ro,rw=10.18.0.100:10.5.16.25,root=10.9.18.115:10.2.114. 19:10.18.0.100:10.5.16.25:10.5.16.70:10.5.2.110:10.5.5.185:169.254.56.111,nosuid
-
they finally showed up late last night so looks good now thank you!
-
that loaded it thanks for the help!!!
-
does the top report run at a certain time of day or anytime you run the load.sh cause i have run that every change we made and nothing in the Volumes TOP as shown in the snippit above!
-
[stor2rrd@bp2-stor01-l002 www]$ ls -ld /home/stor2rrd/stor2rrd/www/ drwxrwxrwx 11 stor2rrd stor2rrd 4096 Oct 17 14:10 /home/stor2rrd/stor2rrd/www/
-
[stor2rrd@bp2-stor01-l002 www]$ ls -ld /home/stor2rrd/stor2rrd/www drwxrwxrwx 11 stor2rrd stor2rrd 4096 Oct 17 14:10 /home/stor2rrd/stor2rrd/www
-
[stor2rrd@bp2-stor01-l002 www]$ ls -ld /home/stor2rrd/stor2rrd/www/* -rwxr-xr-x 1 stor2rrd stor2rrd 686 Oct 12 14:05 /home/stor2rrd/stor2rrd/www/acl_error.png -rwxr-xr-x 1 stor2rrd stor2rrd 192 Oct 12 14:05 /home/stor2rrd/stor2rrd/www/beta-notice.html drwxr-xr-x 9 stor2rrd stor2rrd 252 Oct 17 14:30…
-
i did rerun the load.sh script
Howdy, Stranger!