Ahmed

I do not see " IO CRC errors" in our packet >>> SW L3 the frame appears in your demo >>> SWL2 as mentioned in image

thank you, Pavel, I know how to be active, but I wanted to know if there were any recommended ways to do that. let me checking and feedback to you

Now I need to know which interface is facing the error if there is no number appearing inside the port. I have a conflict with color as you see a lot of colors.

Karel, I appreciate your continued help and great feedback Could you please provide me with the command SNMPv3 activation on the CIsco SW? To compare it with what we have and apply it to our SW,

Hi, Yes, dear, it's working on v2, but not on v3.i mean in same Switch the output [lpar2rrd@xorux ~]$ /usr/bin/snmpwalk -v 3 -u stor2rrd -l noAuthNoPriv -a MD5 -x DES 10.157.43.2 1.3.6.1.2.1.1.5 SNMPv2-MIB::sysName = No more variables left in this MIB View (It is past the end of the MIB tree) [lpar2rrd@xorux ~]$…

if we suppose the issue is from the switch side.Why do we get info when using SNMPv2c on the same switch if the issue is related to the OID of the switch?

but we have another switch working on the SNMPv3 and get the name of SW. The same configuration applies on this SW Also, we have SW working on SNMPv2c and getting information( only for testing). our policy prevents us from using SNMPv2c on all our Switches. is there any way for solving this issue without use v2

Please find the output [lpar2rrd@xorux ~]$ /usr/bin/snmpwalk -v 3 -u stor2rrd -l noAuthNoPriv -a MD5 -x DES 10.157.43.2 1.3.6.1.2.1.1.5 SNMPv2-MIB::sysName = No more variables left in this MIB View (It is past the end of the MIB tree)

Model SW Version SW Image ---------------------- ---------- -------------------- WS-C3560X-48P 12.2(53)SE2 C3560E-UNIVERSALK9-M

could you please provide the command I will write in the Xorux appliance.

LAN is unlimited

Thanks for sharing the details. Unfortunately, as the alert says, File Persona is not compatible with WSAPI. ""that HPE support Answer""

kindly, this HPE questions 1. Kindly explain the issue or query at your end in detail. 2. Has this every worked? 3. Are you trying to use any Third-party application to retrieve the performance metrics? If yes, kindly share the details about the application / the API.

thank you, You're always the best

Thank you, issue solved ????😋😎

I used why the wrong switch appeared after removing the SW by CLI!

After applying the commands,!! How can it be removed (wrong type...)? In the SW tree, it does not appear

thank you dear

i find the collecting up to 28 days

Thank you. Issue solved. could you please tell me the Cause of the problem?

Loge has been uploaded

I am already apply the commands below : 0,30 * * * * /home/lpar2rrd/lpar2rrd/load.sh > /home/lpar2rrd/lpar2rrd/logs/load.out 2>&1 --> 0,10,20,30,30,50 * * * * /home/lpar2rrd/lpar2rrd/load.sh > /home/lpar2rrd/lpar2rrd/logs/load.out 2>&1 and the update every 10 minutes! 1 is there any issue with It?

loge has been updated

can use this command on stor2rrd Or cannot use ? 0,30 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/logs/load.out 2>&1 --> 0,10,20,30,30,50 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/logs/load.out 2>&1 it's ok for lpar2rrd

THANK YOU, 🌷

dear kindly find the screen below

What you want, I will provide for you. What are the SNMP outputs you need? Do you have a specific command?

Sorry for the miscommunication. Please find the new file uploaded.

thank you for your assistance

by use command name -a [lpar2rrd@xorux ~]$ uname -a Linux xorux 4.18.0-477.13.1.el8_8.x86_64 #1 SMP Tue May 30 22:15:39 UTC 2023 x86 [lpar2rrd@xorux ~]$ Is that right? If not, how can I see it? Also, how can I update the version?