I know is old stor2rrd (7.30), but it's works.

I'm trying to add new Hitachi device and i get error about "Filesystem full"...

I've got 400G free space, on the inodes i've got juest 1% inodes used.

In fresh Hitachi device i see data files hitachi.out and some catalogs, but stor can't create rrd files.

Does anybody idea what i need to change to creating this files?

Some permissions should i add?

Logs from Hitachi:

Mon Sep 23 11:28:54 2024: RRDp::create read error : /stor2rrd/stor2rrd/data/Hitachi/CPU-CORE/MPU-10-13.rrc : ERROR: Invalid row count 1080a: value has trailing garbage at /stor2rrd/stor2rrd/bin/Xorux_lib.pm line 69. : No such file or directory

Mon Sep 23 11:28:54 2024: create_rrd err : unable to create /stor2rrd/stor2rrd/data/Hitachi/CPU-CORE/MPU-10-13.rrc (filesystem is full?) at /stor2rrd/stor2rrd/bin/LoadDataModule.pm: line 42489 : No such file or directory

Use of uninitialized value $RRDp::error_mode in string eq at /usr/lib64/perl5/vendor_perl/RRDp.pm line 168, <FH> line 201.

Mon Sep 23 11:33:45 2024: RRDp::create read error : /stor2rrd/stor2rrd/data/Hitachi/CPU-CORE/MPU-10-13.rrc : ERROR: Invalid row count 1080a: value has trailing garbage at /stor2rrd/stor2rrd/bin/Xorux_lib.pm line 69. : No such file or directory

Mon Sep 23 11:33:45 2024: create_rrd err : unable to create /stor2rrd/stor2rrd/data/Hitachi/CPU-CORE/MPU-10-13.rrc (filesystem is full?) at /stor2rrd/stor2rrd/bin/LoadDataModule.pm: line 42489 : No such file or directory

Use of uninitialized value $RRDp::error_mode in string eq at /usr/lib64/perl5/vendor_perl/RRDp.pm line 168, <FH> line 201.

Mon Sep 23 11:38:43 2024: RRDp::create read error : /stor2rrd/stor2rrd/data/Hitachi/CPU-CORE/MPU-10-13.rrc : ERROR: Invalid row count 1080a: value has trailing garbage at /stor2rrd/stor2rrd/bin/Xorux_lib.pm line 69. : No such file or directory

Mon Sep 23 11:38:43 2024: create_rrd err : unable to create /stor2rrd/stor2rrd/data/Hitachi/CPU-CORE/MPU-10-13.rrc (filesystem is full?) at /stor2rrd/stor2rrd/bin/LoadDataModule.pm: line 42489 : No such file or directory

Regards,

Check out what one can see in the built-in performance monitor:

And compare it to what stor2rrd shows:

Seems like the numbers stor2rrd provides are exactly 50% of what they should be.

There was no reply to the post I made a month before. Is this forum dead or something?

I have added a VSP5600 as a new device, and after more than 5 hours no data is shown under capacity. I'm using the rigth export tool version.

Thanks in advance.

[lpar2rrd@xorux stor2rrd]$ sh /home/stor2rrd/stor2rrd/bin/config_check.sh HVSP5601

=========================

STORAGE: HVSP5601: VSPG

=========================

 WARNING : TCP connection to "xx.xx.xx.xx" on port "1099" has failed! It might need to be open on the firewall.

 TCP connection to "xx.xx.xx.xx" on port "51099" is ok

 TCP connection to "xx.xx.xx.xx" on port "51100" is ok

 WARNING : TCP connection to "xx.xx.xx.xx" on port "51101" has failed! It might need to be open on the firewall.

 REST API TEST

 TCP connection to "xx.xx.xx.xx" on port "443" is ok

/usr/bin/perl /home/stor2rrd/stor2rrd/bin/vspg_apitest.pl stor2rrd XXXXX 1.181.166 https HVSP5601 apitest

xx.xx.xx.xx

 Machine Name: xxxxx.acme.com

 Machine Type-Model: VSP 5600

 Machine Serial: 5644456

 IP address controller A:

 IP address controller B:

 Software Version: 90-09-23/00

Export tool version : 1

Loading ExportTool...

Export tool start [Version 90-09-23/00]

command file = /opt/hds/hds_test/command2.txt

[ 1] svpip xx.xx.xx.xx    ; Specifies IP adress of SVP

[ 2] login User = [acme], Passwd = [****************]

[SVP Version] 90-09-23/00

[ExportTool version] 90-09-23/00

[ExportTool IF version] 90-00-00

    [ 3] show         ; output storing period

Monitoring time range

Short Range From : 2024/06/05 15:51 - To : 2024/06/10 15:51 Interval : 5min.

Long Range From : 2023/12/08 00:00 - To : 2024/06/10 15:30 Interval : 15min.

[ 4] group Port ; Port usage

[ 5] shortrange -0001:

    shortrange [2024/06/10 15:46:00]:[2024/06/10 15:51:00], count = 1

[ 6] outpath "/opt/hds/hds_test/performance" ; specifies the sub-directory in which files will be saved

[ 7] option nocompress

[ 8] apply

Start gathering port data

Target = 32, Total = 32

+----+----+----+----+----+----+----+----+----+----+

...................................................

End gathering port data

Start gathering Initiator port data

Target = 8, Total = 8

+----+----+----+----+----+----+----+----+----+----+

...................................................

End gathering Initiator port data

Export tool end

 connection ok

No SAN configured :

No LAN configured :

Please help us resolve the error when we add Hitachi VSP5600 Storage cabinet device on the Stor2rrd server. Many thank teams

We're installing the Hitachi Export Tool 2 and it requires Java(8) to run, but the container image does not contain Java.

Are we doing something wrong, or is the container not expected to have Java?

We've recently received a couple new Hitachi boxes so I added them to stor2rrd straight away. Connection test was successful, new devices appeared in the menu, but no data was retrieved. As we are using CCI + ExportTool, I conclude that CCI works well but ExportTool does not.

Looking into /home/stor2rrd/stor2rrd/logs I see similar error messages recorded for both boxes:

Error: Could not find or load main class com.hitachi.exporttool.cli.Main

Fri Apr 21 13:20:04 2023: command failed: java - classpath "./exportTool.jar":"./external/log4j-core-2.8.2.jar":"./external/log4j-api-2.8.2.jar":"./external/commons-codec-1.12.jar":"./external/lz4-1.3.0.jar" com.hitachi.exporttool.cli.Main "$@" 256 /home/stor2rrd/stor2rrd/bin/vspgperf.pl:5935 : Inappropriate ioctl for device

Stor2rrd works just fine with about a dozen of other Hitachi boxes we have, including g700, g/f900 as well as two other G350s so it's highly unlikely that our exporttool installation is broken. I also tried launching exporttool2 manually against new storages (show interval, export data) as the stor2rrd user and it works without issues. Seems like nothing is wrong with the boxes themselves, it's just that stor2rrd isn't able to start the exporttool with them for some reason.

We are using stor2rrd 7.51 under RHEL 7.8.

Reinstalled stor2rrd 7.21-14 on a fresh RHEL 7.8 server, got everything working fine, but recently discovered a weird issue with health status on Hitachi VSP storage. Health status always says "Optimal", but component list is empty. Something seems to be wrong with SNMP configuration but I can't find out what exactly.

config_check.sh displays the following:

MIB search path: /home/stor2rrd/.snmp/mibs:/usr/share/snmp/mibs

Cannot find module (VSPGx00MIB): At line 1 in (none)

I've put the VSPGx00MIB.txt in both locations but it didn't make any difference.

/home/stor2rrd/stor2rrd/logs/error.log-[storage] shows this for every component:

Got -58 querying [ip] for dkcHWProcessor (1.3.6.1.4.1.116.5.11.4.1.1.6.1.2). /home/stor2rrd/stor2rrd/bin/vspgperf.pl:6079

Tried to replicate the error by running snmpwalk separately and it it doesn't show any problem:

snmpwalk -v 3 -u xormonsnmp -l authPriv -A [key] -X [key] -a SHA -x AES [ip] 1.3.6.1.4.1.116.5.11.4.1.1.6.1.2

SNMPv2-SMI::enterprises.116.*.6.1.2.[serial] = INTEGER: 1

Now I adding the new E590 , the test connection show the same error as below which export tool 2 running as lpar2rrd  

but when I run as root with the same parameter, it can run successfully

Now all the charts on E590 cannot be shown.

Any hints? Thanks!

There is a problem with CPU Display on E590 but not with E790

And CPU utilization is not correct on MPU tab for E590

Firmware: 93-06-23/00 (E590 & E790)

Data Collection: REST

Export tool 2 for (E590 & E790)

Stor2rrd version: 7.40

Problem: (Picture 1)

Everything works fine with E790.

What can be the problem: Stor2rrd sees much more CPU on E590 then it has. (Picture 3)

Have strange issue with Hitachi HUS-VM and stor2rrd. I'm successfully deployed HItachi Configuration Manager Rest API, register HUS-VM and obtain device id throught it. Then i install export tool with corresponding microcode version of HUS-VM into stor2rrd appliance.

I configure storage Device and but ther is no data in the GUI.

when i try to run config_check.sh i've got the following error:

=========================

STORAGE: htc01: VSPG

=========================

 TCP connection to "192.168.0.243" on port "1099" is ok

 TCP connection to "192.168.0.243" on port "51099" is ok

 TCP connection to "192.168.0.243" on port "51100" is ok

 WARNING : TCP connection to "192.168.0.243" on port "51101" has failed! It might need to be open on the firewall.

 REST API TEST

/usr/bin/perl /home/stor2rrd/stor2rrd/bin/vspg_apitest.pl htcadmin XXXXX 10.10.0.55 https htc01 apitest 10.10.0.55 10.10.0.55 730000211918 23451

ERROR: Command https://10.10.0.55:23451/ConfigurationManager/v1/objects/storages/730000211918/snmp-settings/instance failed!

Assure that OpenSSL works: echo "" | openssl s_client -connect 10.10.0.55:23451

{

 "errorSource" : "/ConfigurationManager/v1/objects/storages/730000211918/snmp-settings/instance",

 "message" : "The API is not supported for the specified storage system. (URL = v1/objects/storages/730000211918/snmp-settings/instance, HTTP method = GET, storage device ID = 730000211918)",

 "solution" : "Check and, if necessary, revise the specification of the storage system.",

 "messageId" : "KART40110-E",

 "detailCode" : "40110E-0"

}

Assure that OpenSSL works: echo "" | openssl s_client -connect 10.10.0.55:23451

Export tool version : 1

mkdir: cannot create directory '/opt/hds/ERROR:/log': No such file or directory

/home/stor2rrd/stor2rrd/bin/hds_check.sh: line 109: [: 192.168.0.243: integer expression expected

/home/stor2rrd/stor2rrd/bin/hds_check.sh: line 117: [: 192.168.0.243: integer expression expected

VSPG Error: File /opt/hds/ERROR:/runUnix.sh or /opt/hds/ERROR:/runUnix.bat does not exist !!!

Check install export tool

VSPG Error: command failed: /home/stor2rrd/stor2rrd/bin/hds_check.sh htcadmin <PASSWORD> 192.168.0.243 ERROR: -I1 ERROR: Command https: 192.168.0.243 1 default (443 mostly)

 connection failed!!

 Assure if your Java version is supported by Export Tool, 1.8 should be at least, new G5500 requires Java11

 openjdk version "1.8.0_292"

PS: snmp is configured on HUS-VM, and API works (i've even make a little grafana dashboard). Microcode version is 73-03-74-00

Could anyone advise how to debug this issue ?

TCP connection to x.x.x.x:51101 has failed! Open it on the firewall. (Warning)

=========================
STORAGE: **********: VSPG
=========================
  TCP connection to "******" on port "1099" is ok
  TCP connection to "******" on port "51099" is ok
  TCP connection to "******" on port "51100" is ok
  WARNING : TCP connection to "******" on port "51101" has failed! It might need to be open on the firewall.
  REST API TEST

  TCP connection to "******" on port "443" is ok
/usr/bin/perl /home/stor2rrd/stor2rrd/bin/vspg_apitest.pl stor2rrd XXXXX ****** https System02 apitest ******


  Machine Name: *******-G1500

  Machine Type-Model: VSP G1000

  Machine Serial: ******

  IP address controller A:

  IP address controller B:

  Software Version: 80-06-82/00

Export tool version : 1
Loading ExportTool...
Export tool start [Version 80-06-78/00]
command file = /opt/hds/hds_test/command2.txt
[  1] svpip ******        ; Specifies IP adress of SVP
[  2] login User = [*********], Passwd = [SP5SP5****]
[SVP Version] 80-06-78/00
[ExportTool version] 80-06-78/00
[ExportTool IF version] 80-00-00
[  3] show                  ; output storing period
Monitoring time range
Short Range From : 2021/03/12 05:30 - To : 2021/03/17 05:30 Interval : 5min.
Long  Range From : 2020/09/13 00:00 - To : 2021/03/17 05:15 Interval : 15min.
[  4] group Port ; Port usage
[  5] shortrange -0001:
        shortrange [2021/03/17 05:25:00]:[2021/03/17 05:30:00], count = 1
[  6] outpath "/opt/*******/hds_test/performance"  ; specifies the sub-directory in which files will be saved
[  7] option nocompress
[  8] apply
Start gathering port data
Target = 54, Total = 54
+----+----+----+----+----+----+----+----+----+----+
...................................................
End gathering port data
Start gathering Initiator port data
Target = 10, Total = 10
+----+----+----+----+----+----+----+----+----+----+
...................................................
End gathering Initiator port data
Export tool end
  connection ok

  Machine Name: HDS_VSP_G350

  Machine Type-Model: VSP G350

  Machine Serial: XXXXXXX

  IP address controller A: XXXXXXXX

  IP address controller B: XXXXXXXX

  Software Version: 88-03-29/00

Version or Serial is empty !

command timed out in eval after : 30 seconds
Export tool command failed: "java -classpath "/opt/hds/80-06-75/lib/JSanExportLoader.jar" -Del.tool.Xmx=536870912 -Dmd.command=/tmp/G1500/G1500-type-hus_vm.txt -Del.logpath=/tmp/G1500/log -Dmd.rmitimeout=20 sanproject.getexptool.RJElMain"


2020/08/18 12:25:26 Export tool start [Version 80-06-72/01]
2020/08/18 12:25:26 md.command = /tmp/G1500/G1500-type-hus_vm.txt
2020/08/18 12:25:26 md.logpath = /tmp/G1500/log
2020/08/18 12:25:26 md.logfile = null
2020/08/18 12:25:26 md.rmitimeout = 20
2020/08/18 12:25:26 md.divideshort = null
2020/08/18 12:25:26 md.dividelong = null
2020/08/18 12:25:26 command file = /tmp/G1500/G1500-type-hus_vm.txt
2020/08/18 12:25:26 [  1] svpip 10.246.103.56        ; Specifies IP adress of SVP
2020/08/18 12:25:26 	ipAddress = 10.246.103.56
2020/08/18 12:25:26 [  2] login User = [lpar2rrd], Passwd = [****************]
2020/08/18 12:25:26 . HostPath = //10.246.103.56/RMIControl
2020/08/18 12:25:26 . [login] lookup1:start
2020/08/18 12:25:26 . lookup1 Normal
2020/08/18 12:25:26 . [login] checkLicenseEx:start
2020/08/18 12:25:27 . checkLicenseEx OK!!
2020/08/18 12:25:27 . [login] lookup2:start
2020/08/18 12:25:28 . lookup2 Normal
2020/08/18 12:25:28 . [login] setUserTimeoutValue:start
2020/08/18 12:25:28 . setUserTimeoutValue Normal
2020/08/18 12:25:28 [SVP Version] 80-06-72/01
2020/08/18 12:25:28 [ExportTool version] 80-06-72/01
2020/08/18 12:25:28 [ExportTool IF version] 80-00-00
2020/08/18 12:25:28 . [login] useMonitor:start
2020/08/18 12:25:32 . Find ErrorCode = (1,5400)



?????